manualshive.com logo in svg

Chevrolet 2011 Volt, Owner'S Manual

Looking for the Owner's Manual for your Chevrolet 2011 Volt? Look no further! Download the manual for free at our website manualshive.com and get all the information you need to optimize your driving experience. Get the most out of your Chevy Volt with this comprehensive manual download.

Share
Download
background image

Black plate (9,1)

Chevrolet Volt Owner Manual - 2011

Seats and Restraints

3-9

Raising the Seatback

Notice:

Damage to the safety belt

or rear seat locking mechanism
can occur if the safety belt is
caught between the rear seatback
and the seat locking mechanism.
The safety belt must be out of the
way when the rear seat is raised
to the upright, locked position.
If the safety belt is damaged, see
your dealer and have it replaced.

To raise the seatback:

A. Seatback Locking Mechanism

B. Safety Belt Storage Clip

1. Make sure the safety belt is in

the storage clip (B) before
raising the seatback.

The safety belt should not
cross the seatback locking
mechanism (A) when raising
the seatback.

2. Raise the seatback and push it

rearward to lock it into place.

A tab near the seatback release
lever retracts when the seatback
is locked.

3. Push and pull the top of the

seatback to be sure it is locked
into position.

4. Return the safety belt to the

safety belt guide after raising the
seatback.

Keep the seat in the upright, locked
position when not in use.

Summary of Contents for 2011 Volt































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Volt

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
Suzuki SX4 SEDAN 2008 Owner'S Manual preview
SX4 SEDAN 2008
Brand: Suzuki Pages: 16
Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Prorack K623 Fitting Instructions Manual preview
K623
Brand: Prorack Pages: 15
Thule Kit 1312 Instructions Manual preview
Kit 1312
Brand: Thule Pages: 8
Connects2 PARK-401 User Manual preview
PARK-401
Brand: Connects2 Pages: 2
Carbest 47804 Instruction Manual preview
47804
Brand: Carbest Pages: 64
Honda 08F53-T0A-100 Installation Instructions preview
08F53-T0A-100
Brand: Honda Pages: 2
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1
Jacob Jensen Electronic Parking Disc 3 User Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 17
TIS TISPLUS User Manual preview
TISPLUS
Brand: TIS Pages: 6
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220

Brands by name

Popular brands

Load more brands