If the On Indicator is Lit for a Child
Restraint
If a child restraint has been installed and the on
indicator is lit:
1. Turn the vehicle off.
2. Remove the child restraint from the vehicle.
3. Remove any additional items from the seat such as
blankets, cushions, seat covers, seat heaters,
or seat massagers.
4. Reinstall the child restraint following the directions
provided by the child restraint manufacturer and
refer to
Securing a Child Restraint in the Right
Front Seat Position on page 2
‑
50
.
5. If, after reinstalling the child restraint and restarting
the vehicle, the on indicator is still lit, turn the
vehicle off. Then slightly recline the vehicle
seatback and adjust the seat cushion, if adjustable,
to make sure that the vehicle seatback is not
pushing the child restraint into the seat cushion.
Also make sure the child restraint is not trapped
under the vehicle head restraint. If this happens,
adjust the head restraint. See
Head Restraints on
page 2
‑
7
.
6. Restart the vehicle.
If the on indicator is still lit, secure the child
restraint in a rear seat position in the vehicle,
and check with your dealer/retailer.
2-70
Summary of Contents for 2010 Cobalt
