Chevrolet 2010 Cobalt, Owner'S Manual

Page: 199 / 456

Notice: Contact your dealer/retailer before adding
any equipment.
Adding audio or communication equipment could
interfere with the operation of the vehicle's engine,
radio, or other systems, and could damage them.
Follow federal rules covering mobile radio and
telephone equipment.
Notice: The chime signals related to safety belts,
parking brake, and other functions of your vehicle
operate through the radio/entertainment system.
If that equipment is replaced or additional
equipment is added to your vehicle, the chimes
may not work. Make sure that replacement or
additional equipment is compatible with your
vehicle before installing it. See
Accessories and
Modifications on page 6 ‑ 4 .
The vehicle has Retained Accessory Power (RAP). With
RAP, the audio system can be played even after the
ignition is turned off. See
Retained Accessory Power
(RAP) on page 3 ‑ 23 for more information.
Setting the Clock
Without Date Display
AM/FM Base Radio with a Single CD Player
To set the time:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press
O
to turn the radio on.
2. Press
H
until the hour begins flashing on the
display. Press
H
a second time and the minute
begins flashing on the display.
3. While either the hour or the minute numbers are
flashing, turn
f
to increase or decrease the time.
4. Press
H
again until the clock display stops flashing
to set the currently displayed time; otherwise, the
flashing stops after five seconds and the current
time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press the
H
button until 12H or 24H is
displayed. Once 12H or 24H is displayed, turn
the
f
knob to the desired option to select the setting.
Press the
H
button again to apply the setting, or let the
screen time out.
4-53