Chevrolet 2010 Cobalt Owner'S Manual Download Page 375

Page: 375 / 456

3. If necessary, use the flat end of the wheel wrench

to pry along the edge of the rear wheel cover until
it comes off.

Store the wheel cover in the trunk until the flat tire
is repaired or replaced.

4. Use the wheel wrench to loosen all the rear wheel

nuts. Do not remove them yet.

Notice:

Make sure that the jack lift head is in the

correct position or you may damage your vehicle.
The repairs would not be covered by your warranty.

5. Position the jack lift head at the rear jack location

nearest the rear tire. The rear location is about
4 inches (10 cm) in front of the rear wheel opening.

6-103

Summary of Contents for 2010 Cobalt









































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Cobalt

Reviews:

Related manuals for 2010 Cobalt

Brands by name

Popular brands

Chevrolet 2010 Cobalt, Owner'S Manual

Search results

Summary of Contents for 2010 Cobalt

Reviews:

Related manuals for 2010 Cobalt

Brands by name

Popular brands