manualshive.com logo in svg

Chevrolet 2010 Cobalt, Owner'S Manual

The Chevrolet 2010 Cobalt Owner's Manual is available for free download on our website. This comprehensive manual provides crucial information and guidelines on operating, maintaining, and troubleshooting the Cobalt. Discover everything you need to know about your vehicle, enabling a seamless and enjoyable driving experience, only at manualshive.com.

Share
Download
background image

Section 4

Instrument Panel

Instrument Panel Overview

. . . . . . . . . . . . . . . . . . . . . . . . 4-3

Hazard Warning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Tilt Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Turn Signal/Multifunction Lever . . . . . . . . . . . . . . . . . . 4-4
Turn and Lane-Change Signals . . . . . . . . . . . . . . . . . 4-4
Headlamp High/Low-Beam Changer . . . . . . . . . . . . 4-5
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Windshield Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Headlamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Wiper Activated Headlamps . . . . . . . . . . . . . . . . . . . 4-10
Headlamps on Reminder . . . . . . . . . . . . . . . . . . . . . . 4-10
Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . 4-10
Fog Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Instrument Panel Brightness . . . . . . . . . . . . . . . . . . . 4-11
Dome Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Entry/Exit Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Mirror Reading Lamps . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Electric Power Management . . . . . . . . . . . . . . . . . . . 4-12
Battery Run-Down Protection . . . . . . . . . . . . . . . . . . 4-12
Accessory Power Outlet(s) . . . . . . . . . . . . . . . . . . . . . 4-12
Ashtray(s) and Cigarette Lighter . . . . . . . . . . . . . . . 4-13

Climate Controls

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Climate Control System . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Outlet Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Passenger Compartment Air Filter . . . . . . . . . . . . . 4-17

Warning Lights, Gauges, and Indicators

. . . . . . . . 4-18

Instrument Panel Cluster . . . . . . . . . . . . . . . . . . . . . . . 4-19
Speedometer and Odometer . . . . . . . . . . . . . . . . . . . 4-20
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Safety Belt Reminders . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Airbag Readiness Light . . . . . . . . . . . . . . . . . . . . . . . . 4-21
Passenger Airbag Status Indicator . . . . . . . . . . . . . 4-22
Charging System Light . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Up-Shift Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Brake System Warning Light . . . . . . . . . . . . . . . . . . . 4-23
Antilock Brake System (ABS) Warning Light . . . 4-24
Enhanced Traction System (ETS) Indicator/

Warning Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Electronic Stability Control (ESC)/Traction

Control System (TCS) Indicator/Warning
Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Engine Coolant Temperature Warning Light . . . . 4-26
Tire Pressure Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
Malfunction Indicator Lamp . . . . . . . . . . . . . . . . . . . . 4-27
Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

4-1

Summary of Contents for 2010 Cobalt









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Cobalt

Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Front Runner LATF002 Quick Start Manual preview
LATF002
Brand: Front Runner Pages: 7
Car-Interface CI-RL4-R40 Manual preview
CI-RL4-R40
Brand: Car-Interface Pages: 25
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Quadratec QuadraTop Adventure Top 1113.00 Series Installation Manual preview
QuadraTop Adventure Top 1113.00 Series
Brand: Quadratec Pages: 20
Whispbar K477W Fitting Instructions Manual preview
K477W
Brand: Whispbar Pages: 15
Fortin EVO ONE THAR-GM7 Installation Instructions Manual preview
EVO ONE THAR-GM7
Brand: Fortin Pages: 11
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
SAN HIMA SH-TENT-GRAY-HS03 User Manual preview
SH-TENT-GRAY-HS03
Brand: SAN HIMA Pages: 10
Volvo V60 Owner'S Manual preview
V60
Brand: Volvo Pages: 176
Edscha Trailer Systems Curtain Sider-UL/HD Quick Manual preview
Curtain Sider-UL/HD
Brand: Edscha Trailer Systems Pages: 116

Brands by name

Popular brands

Load more brands