Chevrolet 2010 Avalanche Owner'S Manual Download Page 64

Page: 64 / 582

3. Push the latch plate into the buckle until it clicks.

If you find that the latch plate will not go fully into
the buckle, see if you are using the correct buckle.

Pull up on the latch plate to make sure it is secure.
If the belt is not long enough, see

Safety Belt

Extender on page 2

‑

Position the release button on the buckle so that
the safety belt could be quickly unbuckled if
necessary.

4. If equipped with a shoulder belt height adjuster,

move it to the height that is right for you. See

“

Shoulder Belt Height Adjustment

”

later in this

section for instructions on use and important safety
information.

5. To make the lap part tight, pull up on the

shoulder belt.

It may be necessary to pull stitching on the safety
belt through the latch plate to fully tighten the lap
belt on smaller occupants.

2-30

Summary of Contents for 2010 Avalanche







































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Avalanche

Reviews:

Chevrolet 2010 Avalanche, Owner'S Manual, Page: 64 / 582

Search results

Summary of Contents for 2010 Avalanche

Reviews: