Chevrolet 2010 Avalanche Owner'S Manual Download Page 508

Page: 508 / 582

3. Assemble the two jack handle extensions (I) and

wheel wrench (H) as shown.

4. Insert the open end of

the extension (F)
through the hole in the
rear bumper (G) (hoist
shaft access hole).

5. Raise the tire part way upward. Make sure the

retainer is fully seated across the underside of the
wheel and is centered in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise until
you hear two clicks or feel it skip twice. You cannot
overtighten the cable.

7. Make sure the tire is stored securely. Push,

pull (A), and then try to turn (B) the tire. If the tire
moves, use the wheel wrench to tighten the cable.

6-94

Summary of Contents for 2010 Avalanche







































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Avalanche

Reviews:

Chevrolet 2010 Avalanche, Owner'S Manual, Page: 508 / 582

Search results

Summary of Contents for 2010 Avalanche

Reviews: