Chevrolet 2010 Avalanche Owner'S Manual Download Page 203

Page: 203 / 582

To replace the drain grate:

1. Line up the clips on the vehicle with the slots in the

grate and firmly push the grate down.

Do not force the grate. If it does not clip into place,
realign the clips with the holes and try again.

Side Rail Channels

The side rail channels are located on top of both sides
of the cargo area. Flush them out with clean water if
debris collects inside of them.

Carefully load cargo into the cargo area, so that the
rails do not get damaged.

3-89

Summary of Contents for 2010 Avalanche







































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Avalanche

Reviews:

Chevrolet 2010 Avalanche, Owner'S Manual, Page: 203 / 582

Search results

Summary of Contents for 2010 Avalanche

Reviews: