manualshive.com logo in svg

Chevrolet 2009 TrailBlazer, Owner'S Manual

Introducing the Chevrolet 2009 TrailBlazer, a robust SUV designed for unmatched performance on and off the road. Gain full control and understand your vehicle's every function with the comprehensive Owner's Manual, available for free download at manualshive.com. Discover endless possibilities and conquer new adventures with confidence.

Share
Download
background image

How to Reset the Engine Oil Life
System

The Engine Oil Life System calculates when to change
the engine oil and filter based on vehicle use. Whenever
the oil is changed, reset the system so it can calculate
when the next oil change is required. If a situation occurs
where the oil is changed prior to a change engine oil light
or CHANGE ENGINE OIL message being turned on,
reset the system.

To reset the Engine Oil Life System:

1. Turn the ignition key to ON/RUN with the

engine off.

2. Fully press and release the accelerator pedal slowly

three times within five seconds.

The change engine oil light will flash while the
system is resetting.

3. When the light stops flashing, turn the key to

LOCK/OFF.

If the light/message comes back on when the vehicle
is started, the engine oil life system has not reset.
Repeat the procedure.

What to Do with Used Oil

Used engine oil contains certain elements that can be
unhealthy for your skin and could even cause cancer.
Do not let used oil stay on your skin for very long. Clean
your skin and nails with soap and water, or a good hand
cleaner. Wash or properly dispose of clothing or rags
containing used engine oil. See the manufacturer’s
warnings about the use and disposal of oil products.

Used oil can be a threat to the environment. If you
change your own oil, be sure to drain all the oil from the
filter before disposal. Never dispose of oil by putting it
in the trash, pouring it on the ground, into sewers, or into
streams or bodies of water. Recycle it by taking it to a
place that collects used oil.

5-23

Summary of Contents for 2009 TrailBlazer





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 TrailBlazer

Metra Electronics 99-3010S Installation Instructions Manual preview
99-3010S
Brand: Metra Electronics Pages: 14
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
KEKO K617 Installation Description preview
K617
Brand: KEKO Pages: 3
Movon MDAS-5 Installation Manual preview
MDAS-5
Brand: Movon Pages: 43
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
BMW i wallbox Installation Instructions Manual preview
i wallbox
Brand: BMW Pages: 40
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
SuperATV IN-WS-K-TRX Installation Instructions preview
IN-WS-K-TRX
Brand: SuperATV Pages: 2
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4
AEV AEV30348AC User Manual preview
AEV30348AC
Brand: AEV Pages: 16
Scion 2015 FR-S Quick Reference Manual preview
2015 FR-S
Brand: Scion Pages: 24
Axxess OESWC-7552-STK Installation Instructions Manual preview
OESWC-7552-STK
Brand: Axxess Pages: 8
Macally HRMOUNTPROTRAY User Manual preview
HRMOUNTPROTRAY
Brand: Macally Pages: 19
TAUBENREUTHER 2360-00 Manual preview
2360-00
Brand: TAUBENREUTHER Pages: 10

Brands by name

Popular brands

Load more brands