manualshive.com logo in svg

Chevrolet 2009 TrailBlazer, Owner'S Manual

Introducing the Chevrolet 2009 TrailBlazer, a robust SUV designed for unmatched performance on and off the road. Gain full control and understand your vehicle's every function with the comprehensive Owner's Manual, available for free download at manualshive.com. Discover endless possibilities and conquer new adventures with confidence.

Share
Download
background image

Safety Belts

Safety Belts: They Are for Everyone

This section of the manual describes how to use
safety belts properly. It also describes some things not
to do with safety belts.

{

CAUTION:

Do not let anyone ride where a safety belt cannot
be worn properly. In a crash, if you or your
passenger(s) are not wearing safety belts, the
injuries can be much worse. You can hit things
inside the vehicle harder or be ejected from the
vehicle. You and your passenger(s) can be
seriously injured or killed. In the same crash, you
might not be, if you are buckled up. Always fasten
your safety belt, and check that your passenger(s)
are restrained properly too.

{

CAUTION:

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously
injured or killed. Do not allow people to ride in any
area of your vehicle that is not equipped with seats
and safety belts. Be sure everyone in your vehicle is
in a seat and using a safety belt properly.

This vehicle has indicators as a reminder to buckle the
safety belts. See Safety Belt Reminders on page 3-31
for additional information.

1-13

Summary of Contents for 2009 TrailBlazer





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 TrailBlazer

Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Thule 953000 Instructions Manual preview
953000
Brand: Thule Pages: 8
Volvo M3602654 Installation Instructions Manual preview
M3602654
Brand: Volvo Pages: 10
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Brand: Jaeger Pages: 16
Alfa Romeo Giulietta 2.0 JTDM Manual preview
Giulietta 2.0 JTDM
Brand: Alfa Romeo Pages: 14
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14

Brands by name

Popular brands

Load more brands