manualshive.com logo in svg

Chevrolet 2009 TrailBlazer, Owner'S Manual

Introducing the Chevrolet 2009 TrailBlazer, a robust SUV designed for unmatched performance on and off the road. Gain full control and understand your vehicle's every function with the comprehensive Owner's Manual, available for free download at manualshive.com. Discover endless possibilities and conquer new adventures with confidence.

Share
Download
background image

Both sets of rear seat headphones may include foam
ear pads.

The foam ear pads can become worn or damaged if
they are not handled or stored properly. They can
be replaced separately from the headphone set.

The headphone replacement foam ear pads can be
ordered in pairs. See your dealer/retailer for more
information.

Battery Replacement

To change the batteries on the headphones:

1. Loosen the screw to the battery door on the left

side of the headphones and slide open.

2. Replace the two batteries in the compartment.

Install correctly using the diagram on the inside
of the battery compartment.

3. Replace the battery door and tighten the door

screw.

If the headphones are to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.

Stereo RCA Jacks

The RCA jacks are located behind the video screen.
The RCA jacks allow audio and video signals to be
connected from an auxiliary device such as a camcorder
or a video game unit to the RSE system. Standard RCA
cables, not included, are needed to connect the auxiliary
device to the RCA jacks. The yellow connector inputs
video and the red and white connectors input right and
left audio. Refer to the manufacturer’s instructions for
proper connection of the auxiliary device.

To use the auxiliary inputs on the RSE system, connect
an external auxiliary device to the color-coded RCA jacks
and turn both the auxiliary device and the RSE system
power on. If the RSE system had been previously in the
DVD player mode, pressing the SRCE button on the
faceplate or the remote control switches the RSE system
between the auxiliary device and the DVD player.

3-97

Summary of Contents for 2009 TrailBlazer





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 TrailBlazer

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Porsche 911 GT3 - Owner'S Manual preview
911 GT3 -
Brand: Porsche Pages: 195
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12
Horn Tools PHRRF002 Mounting Instructions preview
PHRRF002
Brand: Horn Tools Pages: 8
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Mopar 77072498AB Manual preview
77072498AB
Brand: Mopar Pages: 18
Ranger design 1525-PC Installation Manual preview
1525-PC
Brand: Ranger design Pages: 22
Jaeger 21260514J Fitting Instructions Manual preview
21260514J
Brand: Jaeger Pages: 11
ATS 664-0030 Installation And Operating Manual preview
664-0030
Brand: ATS Pages: 12
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Brand: Honda Pages: 372
Imiola HAK-POL F/005 Fitting Instruction preview
F/005
Brand: Imiola HAK-POL Pages: 3

Brands by name

Popular brands

Load more brands