Chevrolet 2009 TrailBlazer Owner'S Manual Download Page 327 | Manualshive

Page: 327 / 484

background image

For 6.0L V8 (VIN Code H) Engine
Vehicles Only

Look for three things:

•

GM4718M

This vehicle’s engine requires a special oil meeting
GM Standard GM4718M. Oils meeting this standard
may be identified as synthetic. However, not all
synthetic oils will meet this GM standard. Use only
an oil that meets GM Standard GM4718M.

Notice: Using oils that do not have the GM4718M
Standard designation can cause engine damage not
covered by the vehicle warranty.

•

SAE 5W-30

SAE 5W-30 is best for the vehicle. These numbers
on an oil container show its viscosity, or thickness.
Do not use other viscosity oils such as SAE 20W-50.

•

American Petroleum Institute (API) starburst
symbol

Oils meeting these
requirements should have
the starburst symbol on the
container. This symbol
indicates that the oil has
been certified by the
American Petroleum
Institute (API).

This vehicle’s engine was filled at the factory with a
Mobil 1

®

synthetic oil meeting all requirements for this

vehicle.

5-21

«
...
325
326
327
328
329
...
»

Summary of Contents for 2009 TrailBlazer





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 TrailBlazer

Brand: Samsung Pages: 133

Brand: Zavoli Pages: 26

Brand: Vaisala Pages: 24

1306 RAPID SYSTEM

Brand: Thule Pages: 8

Brand: Raytel LLC Pages: 40

Brand: Gator Pages: 2

Brand: FALCON RIDGE Pages: 8

Brand: Scosche Pages: 8

Brand: TATA Motors Pages: 136

Brand: EUFAB Pages: 12

Brand: Jaeger Pages: 13

Brand: Voxx Electronics Pages: 15

Brand: Westin Pages: 3

Brand: Curt Manufacturing Pages: 4

Brand: Kuda Pages: 2

2013 Accord Sedan

Brand: Honda Pages: 26

Brand: Jeep Pages: 440

Brand: Chrysler Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands