manualshive.com logo in svg

Chevrolet 2009 TrailBlazer, Owner'S Manual

Introducing the Chevrolet 2009 TrailBlazer, a robust SUV designed for unmatched performance on and off the road. Gain full control and understand your vehicle's every function with the comprehensive Owner's Manual, available for free download at manualshive.com. Discover endless possibilities and conquer new adventures with confidence.

Share
Download
background image

{

CAUTION:

An electric engine cooling fan under the hood can
start up even when the engine is not running and
can cause injury. Keep hands, clothing, and tools
away from any underhood electric fan.

{

CAUTION:

Heater and radiator hoses, and other engine parts,
can be very hot. Do not touch them. If you do,
you can be burned.

Do not run the engine if there is a leak. If you run
the engine, it could lose all coolant. That could
cause an engine fire, and you could be burned.
Get any leak fixed before you drive the vehicle.

Notice: Using coolant other than DEX-COOL

®

can

cause premature engine, heater core, or radiator
corrosion. In addition, the engine coolant could
require changing sooner, at 30,000 miles (50 000 km)
or 24 months, whichever occurs first. Any repairs
would not be covered by the vehicle warranty.
Always use DEX-COOL

®

(silicate-free) coolant

in the vehicle.

Engine Coolant

The cooling system in the vehicle is filled with
DEX-COOL

®

. This coolant is designed to remain in the

vehicle for five years or 150,000 miles (240 000 km),
whichever occurs first.

The following explains the cooling system and how
to check and add coolant when it is low. If there
is a problem with engine overheating, see Engine
Overheating on page 5-35.

5-29

Summary of Contents for 2009 TrailBlazer





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 TrailBlazer

Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
ULTIMATE SPEED 1188 1525 Instructions For Use And Safety Manuallines preview
1188 1525
Brand: ULTIMATE SPEED Pages: 26
Buick 2014 LaCrosse Manual preview
2014 LaCrosse
Brand: Buick Pages: 112
RADICAL R-C10AD2 Device Installation Manual preview
R-C10AD2
Brand: RADICAL Pages: 11
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
Quadratec QRC Installation Manual preview
QRC
Brand: Quadratec Pages: 8
Audiovox Rear Observation System Package RVMPKG2 Installation Manual preview
Rear Observation System Package RVMPKG2
Brand: Audiovox Pages: 15
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
VER-MAC PCMS-1210 QS User Manual preview
PCMS-1210 QS
Brand: VER-MAC Pages: 44

Brands by name

Popular brands

Load more brands