Chery SQR477F User Manual Download Page 38

Page: 38 / 163

Operation and Adjustment of Equipment inside Vehicle

- 32 -

Rear ceiling lamp

In order to make things convenient for

rear row passengers, rear personal light

are designed, it is the door light

simultaneously. If you press the ―door‖

button, the light will be on if the door

is open; the light will be off if the door

is closed. If you press the ―open‖

button, the light will be always on,

therefore, we recommend you press

the ―door‖ button.

Front cup holder

The cup holder is mounted on the front

controls panel; it is designed for

holding cups fit snugly in its holes.

！

Notice:

If the lid is forcibly pulled up, the

drink may spill over the seat occupants,

so do not leave the cup lid open, while

driving.

Operation:

Shown as the illustration, push the

outer cover of cup holder; you can

open it.

Push it in completely; you can close it.

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands