Chery SQR477F User Manual Download Page 35

Page: 35 / 163

Operation and Adjustment of Equipment inside Vehicle

- 29 -

Adjustment of steering wheel

This equipment is designed according

to requests from drivers of different

height, bodily form and hobbies.

Adjustment:

Pull down the adjustment switch,

move the steering wheel up and down

to suitable position, then pull up the

switch to ―lock‖ position, shake the

steering wheel to see if it is locked

properly.

！

Notice: Adjusting steering wheel is

strictly  forbidden  while  driving.  You
can  drive  only  after  the  adjustment  is
performed  and  the  steering  wheel  is
locked  properly,  otherwise  it  may
cause severe traffic accident.

Horn button Sun visor

Horn button on both sides of the steering

wheel, wherever the ignition switch is,

the horn can bark.

Sun visor

Sun visor can be rotated up and down,

or can be rotated laterally, protect

driver and occupants against strong

irradiation.

Pull down the sun visor if you want to

keep the front sunshine away, sun visor

on the left can be took out of the fixed

clamp buckle on the right of the sun

visor. Rotate to left side glass

regarding the left axle as the center, in

order to keep left side sunshine away.

It is ok for you to buckle the sun visor

and straighten it up while taking the

sun visor back.

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands