Chery SQR477F User Manual Download

Page: 157 / 163

Technical Requirements and Data

- 151 -

Oils for vehicle use:

Engine oil

Oil viscosity for this vehicle use is 10W-30 (not lower than grade SG); selected oil viscosity for vehicle use in winter is 5W-30

(not lower than grade SG).

We recommend shell brand engine oil according to the actual condition in China at present.

Don‘t confuse engine oil of different brands from different manufacturers together.

Please select suitable engine oil according to recommended one and actual conditions as possible as you can.

Failure to do so will result in engine being over worn or other more severe malfunction.

Fuel

You should select premium unleaded gasoline with a Research Octane Number of 93 or higher for optimum engine performance

for this vehicle to use.

It is sure to hasten life of engine if you select gasoline with low octane number or gasoline of poor quality.

Transmission gear oil

Transmission gear oil for this vehicle to use: for manual transmission is GL-4, SAE 75W-90 or Fuchs 75V, do not confuse gear

oil of different brands together.

Coolant

Recommended by the User‘s Manual for this vehicle, we select coolant of ESSEX or Shell brand. Soft and hard water are

forbidden to use as coolant.

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Related manuals for SQR477F

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Related manuals for SQR477F

Brands by name

Popular brands