Chery SQR477F User Manual Download Page 117

Page: 117 / 163

Audio System for Songs (Optional)

- 111 -

Phenomenon

Cause

Troubleshooting

power

supply

There is something wrong with the wiring.

Please check the wiring.

Disc box cannot

be inserted.

There is something wrong with the disc box inserting

method.

Insert it correctly.

Disc box has already been inserted in the player.

Let it exit, and insert another one.

Deformation of disc box

Please buy a new CAA-397 disc box.

―NO

DISC‖

appears

while

searching

programmes

The disc is inserted reversely.

See ―CD inserting‖ for reference. Insert disc

correctly once again.

There is moisture or dirt on the disc.

Wipe moisture or dirt off.

Noise, skip

CD is too dirty.

Clean the disc.

Deformation and severe damage of CD

Compare with other discs. If it is damaged,

abandon it.

Disc box exits

after

being

pushed in.

Failure to insert disc box to the seat.

See ―CD inserting‖ for reference. Insert the seat

correctly.

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands