Chery SQR477F User Manual Download Page 120

Page: 120 / 163

Maintenance and Upkeep

- 114 -

1.Power steering liquid

bank

2. Front bin relay box 1
3. Front bin relay box 2
4. Expansion tank
5.Washer fluid reservoir
6. Oil dip-stick
7. Oiling port cover
8. Fuse box
9. Air filter
10. Battery

Maintaining

protective

measures

When you perform maintenance by

yourself, utmost care should be

taken to prevent unnecessary

personal injury or vehicle damage.

Here are a few precautions that you

should be especially careful to

observe:

▪If the engine is successive hot, turn

off the engine immediately, so as

to make it cool, otherwise it is

possible to damage the engine.

▪Do not get under your vehicle with

just the body jack supporting it.

Always use solid supports for

safety, if it is necessary for you to

be under the vehicle. In addition,

somebody should be with you for

assistance, in order to avoid any

contingency.

▪Do not allow smoke flame or

anything may be cause sparks

around the battery and fuel, in

order to avoid any accident.

▪While connecting battery cable, pay

special attention to the poles. Do

not connect positive cable to

negative cable column or negative

cable to positive cable column.

Generally speaking, positive and

negative poles are marked with

―+‖ (positive) or ―-‖ (negative)

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands