Chery SQR477F User Manual Download Page 19

Page: 19 / 163

The

Need-to-Know before Driving

- 13 -

Take off the head restraint from the

seat backrest

Pull up the locking button of seat

backrest, so as to relax the seat

backrest, fold it frontward and

downward.

In order to make the seat backrest

upright, please pull the backrest up,

then push it to the ―locked‖ position,

and confirm it is locked properly.

In order to make the seat return to its

original position, please pull it

backward, and then push it until it is

locked properly.

！

Notice

Do not pile up objects on rear row

seat, doing so will obstruct the view
of the driver, furthermore, it is
possible to hurt the occupant while
the objects is moving.

In order to make the seat backrest

upright again, please observe the
followings:

1. Lock the seat and seat backrest by

means of pushing or pulling them.

2. Make sure the seat belt is not

twisted or pinched in the backrest, at
the same time; please put the seat
belts on suitable place.

Safety belt precautions

Chery recommends that the driver and

passengers in the vehicle be properly

restrained at all times with the safety

Summary of Contents for SQR477F




































































































































































Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands

Chery SQR477F, User Manual

Search results

Summary of Contents for SQR477F

Reviews:

Brands by name

Popular brands