CHEETAH Hardware User’s Manual
Imperx, Inc.
Rev. 1.6
6421 Congress Ave.
8/26/2016
Boca Raton, FL 33487
+1 (561) 989-0006
71 of 121
110 to 111 – N/A
Data (31:3)
:
N/A
Trigger Enable
This register enables or disables the triggering operation
Address
:
0x0654
Data (0)
:
1 – trigger is disabled, free running mode
0 – trigger is enabled – camera is in trigger mode
Data (31:1)
:
N/A
Software Trigger Start
The ‘Start SW Trigger’ command instructs the camera to generate one short
trigger pulse. This is a command, not a register. The act of writing to this
location initiates the pulse generation.
Address
:
0x6030
Triggering Edge Selector
This register selects the triggering edge – Rising or Falling.
Address
:
0x0658
Data (0)
:
0 – rising edge
1 – falling edge
Data (31:1)
:
N/A
Trigger De-bounce Time
This register selects the trigger signal de-bounce time. Any subsequent trigger
signals coming to the camera within the de-bounce time interval will be
ignored.
Address
:
0x065C
Data (2:0)
:
000 – no de-bounce
100 – 10
s de-bounce time
101 – 50
s de-bounce time
001 – 100
s de-bounce time
110 – 500
s de-bounce time
010 – 1.0 ms de-bounce time
111 – 5.0 ms de-bounce time
011 – 10.0 ms de-bounce time
Data (31:3)
:
N/A
