Before you begin, if this CheckVideo device will be monitored by a central station, please contact the central station for a username and password on their existing
CheckVideo account. If this device will be self-monitored, you will be creating a CheckVideo account in Step 5.
Confirm that you have the equipment you will need.
Included in the CheckVideo Gateway for Mobile Broadband Networks Kit:
• CheckVideo Gateway for Mobile Broadband Networks with Franklin® 3G S600C Module
• CheckVideo Gateway power supply (9V, 1.66A)
• Franklin 3G Module power supply (12V, 1 A)
• Franklin 3G Module antennas (2)
• USB 2.0 Cable
• Sticker displaying MEIDs for the Franklin 3G Module and Serial Number (SN) for the CheckVideo Gateway (see page 11)
• 8 pin Phoenix connectors (optional, for digital input/output contacts)
Required, but not included:
• Sprint 3G Network Access. Signal strength greater than -84 to -86 dBm (e.g., -85 dBm, -50 dBm, etc.) is required to receive firmware updates and stream
live video
• Up to four fixed, analog NTSC/PAL cameras
• Computer with Microsoft Internet Explorer or Mozilla Firefox (required for initial registration and configuration)
Optional:
• Monitor for viewing Received Signal Strength during setup. This can be a TV connected to a CheckVideo Gateway monitor connector with a BNC to RCA
cable.
• 8 pin Phoenix connectors for digital input/output contacts (included in kit)
• Uninterruptible Power Supply (UPS)
• USB storage device for expanded storage (up to 1 TB). This will require an externally-powered USB hub. If using a UPS power source, the same power
source should be used for the entire CheckVideo solution (i.e., the CheckVideo Gateway, USB hub, Franklin 3G Module, storage device, and cameras).
For
more information, see the Appendix on pages 23-24
.
Step 1
Review Requirements
page 2
CheckVideo Gateway for Mobile Broadband Networks Installation Guide
