Step 7-4
Define Notification Methods by Camera (continued)
page 20
CheckVideo Gateway for Mobile Broadband Networks Installation Guide
Figure 37
Select Notification Method section, User Notification Methods area
Figure 38
Digital Output contacts on CheckVideo Gateway
Digital Output contacts
The user name and notification methods that you supplied in Step 5-1 and 5-2 (see
pages 7 and 8) automatically appear in the Users list (see Figure 37).
Select any user(s) who should receive notifications for this camera. Then use the
drop down box under Notification Method to choose the destination and format of
their notifications.
Select Digital Output if you want the CheckVideo Gateway to trigger an external
sensor when a behavior event occurs. For this to work, you must use an 8 pin
Phoenix connector to integrate sensor wires to the Digital Output contacts on the
CheckVideo Gateway (Figure 38).
The Advanced Analytics setting controls whether the system will apply standard
analytical pre-filtering to events that are sent to output contacts. This pre-filtering is
helpful in improving event detection accuracy. It does, however, add a few seconds
of lag time for events to be reported. If you are using the Digital Output feature and
find this lag time to be unacceptable,you can switch Advanced Analytics to Off.
If selecting Digital Output, you can set a Closure Duration, which determines how
long a particular output contact closure effect (e.g., a strobe) lasts.
Click the Save and Return to Dashboard or the Save and Configure Another Camera
button.
