9
9
To measure a voltage, proceed as follows:
1. Set the switch to
or
;
2. Select the type of signal (AC, DC or AC+DC) by pressing
.
Depending on your selection, the screen will display AC, DC or AC+DC
3. Connect the black lead to the
COM
terminal and the red lead to "
+
";
4. Place the test probes on the terminals of the circuit to be measured;
5. Read the measurement indicated on the display
6. By default, the 2
nd
display indicates the frequency, except for DC.
3.1.3 Frequency measurement
To measure the frequency, proceed as follows:
1. Set the switch to
;
2. Connect the black lead to the
COM
terminal and the red lead to "
+
";
3. Place the test probes on the terminals of the circuit to be measured;
4. Read the measurement indicated on the display.
