10
10
3.1.4 Resistance measurement
To measure the resistance, proceed as follows:
1. Set the switch to
;
2. Connect the black lead to the
COM
terminal and the red lead to "
+
";
3. Place the test probes on the terminals of the component;
Remark:
all resistance measurements must be performed with the power off.
4. Read the measurement indicated on the display.
5. "
O.L
" is displayed if the circuit is open.
3.1.5 Audible continuity measurement
For audible continuity measurement, proceed as follows:
1. Set the switch to
;
2. Press
. The
symbol is displayed;
3. Connect the black lead to the
COM
terminal and the red lead to "
+
";
4. Place the test probes on the terminals of the circuit to be measured;
5. Read the measurement indicated on the display.
6. The continuity beep sounds when R < 30
Ω
± 3
Ω
.
7. "
O.L
" is displayed if the circuit is open.
