35
8.5 Pan and Tilt Default Settings
You can toggle between two settings for Pan and Tilt. The soft-key for this function is on the
second page of super user options. In
Snap
mode the pan and tilt changes will happen
instantaneously. If
Fade
mode is chosen the changes will happen according to the time set on
the
Fade Master
when a memory is triggered.
8.6 Other LTP Default Settings
You can toggle between two settings for all the LTP channels other than pan and tilt. This will
include all colour and beam shape parameters. The soft-key for this function is on the second
page of super user options. In
Snap
mode LTP changes will happen instantaneously. If
Fade
mode is chosen the changes will happen according to the time set on the
Fade Master
when a
memory is triggered.
8.7 LCD Settings
This option is available on the third page of super user functions. Selecting the
LCD B
soft-key
will allow you to change the backlight brightness of the LCD screen. Using the
Up
and
Down
soft-keys will allow you to alter the settings.
Selecting the
LCD C
soft-key will allow you to change the contrast of the LCD screen. Using the
Up
and
Down
soft-keys will allow you to alter the settings.
8.8 Test Function
This option is available on the third page of super user functions. In this mode, all normal
button/fader operation is disabled, and the desk enters factory test mode. Fader values, sound
to light readings, button states etc. are displayed on the main LCD. Normal operation should not
require you to use this function. It is only needed for servicing of the console.
Test mode is exited using the
←
soft-key.
8.9 Version Information
Selecting the
Version
soft-key will display information on the current Firmware version and the
Serial number of the console. A customer service representative may ask you for this
information if you are seeking technical support.
