Chattanooga Triton 4749 User Manual Download Page 45 | Manualshive

Page: 45 / 60

background image

Triton® Traction

43

operAtion

user protocols

This library is a series of protocols created by the user and stored in the
unit memory. The following information gives general instructions as to
setup, saving and access of User Protocols. Should the Restore Default
Protocol button be pressed, through the Utilities section of the Clinical
Resources Screen, all User Protocols will be permanently removed from
the unit.

NOTE:

Twenty User Protocols can be saved per body part as well as a

Default Protocol for Cervical and Lumbar only.

Setup and Saving User Protocols

Select and edit the parameters of the
desired treatment from the Treatment
Screen.
Press the Clinical Resources button on
the front of the traction unit.
Press the Save Protocol button located
in the Protocols section of the menu.
Press the Up or Down Arrow button
to select the number of User Protocol
to save the desired treatment to or
the Default Protocol button to save
treatment as the default. Press the
Return Arrow to accept.

NOTE:

The Default Protocol is only

available for Cervical or Lumbar
Traction.

After the Return Arrow is pressed, a
keyboard will be displayed to enter the
name of the User Protocol. Once the
User Protocol name has been entered,
press the Return Arrow to accept.

A message will be displayed saying

Current treatment settings have been

saved as "Protocol Name".

Touch the

screen to continue.

«
...
43
44
45
46
47
...
»

Summary of Contents for Triton 4749





























































Reviews:

No comments

Related manuals for Triton 4749

Brand: MacDon Pages: 17

Brand: Olympus Pages: 50

Brand: VAHVA Pages: 19

Brand: MAHLE Pages: 21

Brand: FagronLab Pages: 16

Brand: XAG Pages: 24

Brand: PANDROL Pages: 36

RIDA qLine ZG2601

Brand: R-Biopharm Pages: 23

Brand: JBSYSTEMS Light Pages: 17

Brand: TDR Pages: 8

Brand: Vahterus Pages: 31

ULTRATHERM 908i

Brand: gbo Pages: 32

Brand: Dantel Pages: 6

Brand: Zero 88 Pages: 22

Brand: Yaasa Pages: 20

Brand: Yamaha Pages: 178

Brand: Yamaha Pages: 15

Brand: Ametek Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands