Chattanooga Triton 4749 User Manual Download Page 23 | Manualshive

Page: 23 / 60

background image

Triton® Traction

21

setup

remoVing oF the semg module

• Disconnect the traction unit from the power source before attempting
any maintenance, installation, removal, or replacement procedures to
prevent electrical shock and possible damage to the unit.

Gently push the front panel back into
the front of the traction unit. Once
the plastic of the unit and the front
panel are aligned, the connector
should be inserted properly, with the
tabs locked in place.

Plug the traction unit back into the
power source. Connect the Patient
Interrupt Switch into its receptacle.
Turn the unit on.

The traction unit should automatically
recognize that the sEMG Module
has been removed, with the sEMG
Traction button now being inactive
on the Home Screen.

Turn the unit off. Disconnect the
traction unit from its power source.
Disconnect the Patient Interrupt
Switch and the sEMG lead wire from
the receptacles.

Gently press the tabs underneath
the unit, pull and remove the sEMG
Module from the traction unit

«
...
21
22
23
24
25
...
»

Summary of Contents for Triton 4749





























































Reviews:

No comments

Related manuals for Triton 4749

Brand: Palazzetti Pages: 112

Brand: MacDon Pages: 272

Brand: MacDon Pages: 70

Brand: 1010music Pages: 2

Brand: 1010music Pages: 4

Sonopuls HD 4050

Brand: BANDELIN Pages: 48

Brand: Halyard Pages: 88

Brand: HALDER Pages: 2

Brand: Hällde Pages: 40

Brand: Hällde Pages: 6

Brand: IDS Pages: 2

Brand: Velp Scientifica Pages: 12

Brand: Yamaha Pages: 24

Brand: J&M Pages: 33

Brand: Samson Pages: 2

Chicken Coop Plan 3x5

Brand: EASY COOPS Pages: 21

Chicken Coop Plan 4x6

Brand: EASY COOPS Pages: 18

Chicken Coop Plan 8x10

Brand: EASY COOPS Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands