Chattanooga Triton 4749 User Manual Download Page 54

Page: 54 / 60

Triton® Traction

troubleshooting

problem

possible

remedy

Unable to properly read Patient Data Card.

• Properly insert a Patient Data Card.

• Use a known good Patient Data Card.

• If problem persists, contact dealer or DJO, LLC for service.

Attempted to use an Invalid Patient Data Card.

• Properly insert a Patient Data Card.

• Use a known good Patient Data Card.

• If problem persists, contact dealer or DJO, LLC for service.

No Session Data is available on the inserted Patient

• Save session data to Patient Data Card.

Data

Card.

• Use a known good Patient Data Card.

• If problem persists, contact dealer or DJO, LLC for service.

Patient Data Card is full.

• Purchase additional Patient Data Cards from an authorized DJO, LLC dealer.

sEMG Traction button is grayed out.

• An sEMG Module is required to initiate EMG Traction

• Make sure sEMG Module is properly inserted into the Triton traction unit. If

problem persists, contact dealer or DJO, LLC for service.

Summary of Contents for Triton 4749





























































Search results

Summary of Contents for Triton 4749

Reviews:

Related manuals for Triton 4749

Brands by name

Popular brands

Chattanooga Triton 4749, User Manual

Search results

Summary of Contents for Triton 4749

Reviews:

Related manuals for Triton 4749

Brands by name

Popular brands