Chattanooga Triton 4749 User Manual Download Page 43

Page: 43 / 60

Triton® Traction

operAtion

retrieVing dAtA From existing pAtient dAtA cArd

Existing Patient Data Card Use

Insert the Patient Data Card (with the

gold chip facing up) into Patient Data

Card port located on the front of the

traction unit.

Press the Clinical Resources button on

the front of the traction unit.

Press the Patient Card (Patient's Name)

button located in the Patient Card

section of the menu.

NOTE:

If the Patient Data Card is not

inserted, this button is

deactivated.

The treatment list is located on the

right side. Press the Up or Down Arrow

button to select the desired treatment.

Press the Return Arrow to accept. This

will show the following information:

Before and After Treatment Pain

Information (Pain Map, Pain Scale and

Pain Type) and Session Notes.

NOTE:

The box located on the left

side of the treatment list is a

review of treatment parameters

of the selected treatment.

The review of the treatment

shows the following

information:

Patient's Name, Date, Start

Treatment Time, End Treatment

Time, Treatment Parameters and

Session Notes (stored on card

via PC only).

Press Run This Treatment button.

Read and follow the steps of the

Patient Preparation section on

Pages

24 - 25

to set up traction treatment.

Press the Start button to begin

treatment.

Summary of Contents for Triton 4749





























































Search results

Summary of Contents for Triton 4749

Reviews:

Related manuals for Triton 4749

Brands by name

Popular brands

Chattanooga Triton 4749, User Manual

Search results

Summary of Contents for Triton 4749

Reviews:

Related manuals for Triton 4749

Brands by name

Popular brands