7
6. Secure arms with 3/8-16 x 1-3/4”
socket head cap screws and
high-collar lock washers. Use a
small amount of Locktite® on the
threads.
Note: This pinch-bolt confi guration
applies pressure against the
spline to remove all play.
Preload Adjuster Assembly
Following photos shot with bolt-on
style axle brackets. Installation
procedure is identical.
7. Make sure 1-7/8” female threads
in lower axle brackets are clear
before begining assembly. Use
a wire-tooth brush in a rotating
motion to clean the bores. The
fi ne thread is easily siezed up by
debris or powder-coat residue.
8. Apply a small amount of Anti-
Seize to the external threads of
the preload adjuster assemblies.
Summary of Contents for 5806-U10
