Charmate CM160-028, Instructions Manual

Page: 15 / 24

14 15
SMOKE MODE
Turn the Temperature Control Knob
to “Smoke”, the smoker will now be
in Smoke Mode.
To increase the amount of smoke,
the smoker controls the pellets
feeding speed. There are 8 preset
speeds, from the fastest (P0) to the
slowest (P7). The 8 preset speeds are
P0, P1, P2, P3, P4, P5, P6 and P7.
TURNING OFF THE SMOKER
To ensure your Smoker will perform at its best for years
to come, it is important to self-clean. To do this allow the
smoker to continue running at a high temperature for 5
to 10 minutes after each use.
If you have a been cooking extremely greasy food, run
your smoker for an extra 10 to 20 minutes. This will
reduce the chance of flare ups next time you use your
smoker.
Turn the temperature Control Knob to “Off”. Your smoker
will now stop feeding pellets into the Fire Pot. The Draft
Fan will continue to work for another 10 minutes, so that
all the unburned pellets in the Fire Pot can be burned off.
10 minutes later, unplug the power cord from outlet.
150
110
120
95
175
205
230
245
High
Off
Low
“P”SET
Diagram 2
SMOKER LIGHTING INSTRUCTIONS
P0 = Less smoke, more heat
P7 = More smoke, less heat
Smoke Mode Indication
Turn the Temperature Control Knob to “Smoke” and the
smoker will now be in Smoke Mode and correspondingly
display “SMOKE” on the upper left side of LED Screen. See
Diagram 3.
Presetting Pellets Feeding Speed (Smoke Mode)
When the smoker is set in Smoke Mode, you can alter
the preset pellet feeding speed by turning the Smoke
Dial. It displays on the left side of LED Screen.
In Diagram 3 the preset pellet feeding speed is “P0”.
Diagram 3
Presetting
Feeding Speed
P0 P1 P2 P3 P4 P5 P6 P7
Keep feeding
for (seconds)
18 18 18 18 18 18 18 18
Stop feeding
for (seconds)
55 70 85 100 115 130 140 150