6
7
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before
proceeding. Find a large, clean area in which to assemble
your smoker. Lay cardboard down to protect the smoker
during assembly.
Please refer to the parts list and assembly diagram as
necessary.
Smoker assembly involves large components; therefore,
it is advised to have two people to set up the unit.
Before Step 1
Keep the left side (Label B) of the Barrel Body upwards.
Be sure the directions of letters (A or B) on Barrel Body and legs match.
WARNING:
THE MANUFACTURER HAS MADE EVERY EFFORT TO ELIMINATE ANY SHARP EDGES. HOWEVER,
YOU SHOULD HANDLE ALL COMPONENTS WITH CARE TO AVOID ANY POTENTIAL ACCIDENTAL INJURY.
Tools Needed:
• Phillips Head Screwdriver
• Adjustable Wrench
NOTICE:
Make sure that all the plastic protection is
removed before assembling.
CAUTION:
Be careful when the Barrel Lid is open during
assembly, to prevent bodily injury should it close
suddenly.
Summary of Contents for CM160-028
Page 23: ...23 NOTES ...
Page 24: ...24 24 ...