Charmate CM160-028, Instructions Manual

Page: 7 / 24

6 7
ASSEMBLY INSTRUCTIONS
Step 1
Stand the Barrel Body up on a cushioned surface with
its right side downwards (with label A) and its left side
upwards (with label B). Attach right legs (marked with
label A) and left legs (marked with label B) to Barrel
Body with M6 x 12 bolt (BB) and M6 nut (CC).
Note:
1. Before assembling the legs, be sure that the
directions of the letters (A or B) on the labels (both on
Barrel Body and legs) match, so that the legs will be
assembled in the correct direction.
2. Initially, keep the bolts and nuts loose. They can be
tightened after the wagon wheels and bottom shelf
are assembled.
Hardware Used
BB M6x12 Bolt 16pcs
CC M6 Nut 16pcs
Step 2
Keep the Barrel Body upright as step 1.
Then attach bottom shelf to legs with M6 x 55 bolt (AA)
and M6 nut (CC).
Hardware Used
AA M6x55 Bolt 4pcs
CC M6 Nut 4pcs
CC BB
Left leg (short)
Right leg (long)
Barrel Body
CC
AA
Bottom Steel
Wire Shelf
CC BB
Left leg (short)
Right leg (long)
Barrel Body
CC
AA
Bottom Steel
Wire Shelf