www.charltonandjenrick.co.uk
7
LT8227 (ISS 1)
SECTION TWO Introduction (user instructions)
•
The PARAGON CORE BF is an inset room sealed live fuel-effect gas appliance designed for use in locations
that do not have a conventional chimney. The appliance must be installed against an outside wall because
the air to support combustion is taken from the outside and the products of combustion are expelled to the
outside.
•
The appliance incorporates a safety device in the form of a FLAME SUPERVISION DEVICE, which constantly
monitors the flame and will cause the gas to be switched off if the flames are extinguished for any reason.
THIS DEVICE MUST NOT BE OVERRIDDEN.
If this situation occurs on a regular basis have the appliance
checked by a qualified engineer. The problem may be due to a blocked or restricted flue.
•
Before removing the fret, trim, glass or fuel bed for cleaning the fire should be turned off, and left to cool
down.
•
NOTE:
In use some discoloration of the components will take place in the combustion box, this is normal, but
can be kept to a minimum if the logs are placed correctly (i.e. after cleaning). See Section 4.
•
As with all heating appliances certain areas (Working Surfaces) become very hot when the appliance is in
use. Only the control handle should be touched when the fire is being used.
