www.charltonandjenrick.co.uk
5
LT8227 (ISS 1)
SECTION ONE Important Information (user instructions)
Consumer protection information
As manufacturers and suppliers of heating products, we take every care, as far as is reasonably practicable, that these
products are so designed and constructed as to meet the general safety requirement when properly used and installed.
To this end, our products are thoroughly tested and examined before despatch.
IMPORTANT NOTICE:
Any alteration that is not approved by the appliance manufacturer could invalidate the approval
of the appliance, operation of the warranty and could affect your statutory rights.
Health and safety notice
Important
This appliance could contain some of the materials, indicated below, that could be interpreted as being injurious to
health and safety. It is the users / installers responsibility to ensure that the necessary personal protective clothing is
worn when handling these materials, see below for information.
Artificial Fuels, Mineral Wool, Insulation Material, Refractory/Ceramic Fibres, Glass Yarn -
may be harmful if inhaled,
may be irritating to skin, eyes, nose and throat.
When handling
avoid inhaling and contact with skin or eyes. Use disposable gloves, facemasks and eye protection.
After handling wash hands and other exposed parts. If a vacuum is used for cleaning the coals or cleaning after servicing
/ installation it is recommended that it be of the type fitted with a HEPA filter.
Disposal of refractory/ceramic materials
.
To keep dust to a minimum these materials should be securely wrapped in
polythene and be clearly labelled ‘RCF waste’. These materials are not classified as ‘hazardous waste’ and should be
disposed of at a site licensed for the disposal of industrial waste.
•
The PARAGON CORE BF is an inset room sealed decorative fuel-effect gas appliance.
•
The PARAGON CORE BF is available in
Natural Gas (G20 @ 20 mbar Only).
The marking (
G20
for natural gas)
on the packaging and the data badge specify the gas for which the appliance has been factory set.
Note:
These appliances should only be used on the appropriate gas specified. They are not suitable for
conversion from one gas to the other.
•
Failure to install appliance correctly could lead to prosecution.
•
In GB (Great Britain), the appliance must be installed and serviced by a competent person i.e. Gas Safe-
registered, in accordance with the GAS SAFETY (INSTALLATION AND USE) REGULATIONS, The Building
Regulations (or The Building Regulations (Scotland) or The Building Regulations (Northern Ireland)) and The
Current I.E.E. Wiring Regulations, if appropriate.
•
In IE (Ireland), the appliance must be installed and serviced by a competent person and installed in
accordance with the current edition of I.S.813 Domestic Gas Installation, the current Building Regulations
and the current ETCI rules for electrical installation, if appropriate.
•
The PARAGON CORE BF does not require a chimney, but
must be
installed against an outside wall.
•
It is important that the flue terminal is regularly checked and kept clear at all times.
•
If the terminal is accessible to people (i.e. less than 2m above a walkway, balcony etc.) the terminal guard
must be fitted to prevent access to the flue outlet, which becomes hot when the fire is in use.
•
All combustible material must be removed from behind the fire and fire trim.
