Champion UH-100, Installation Manual

Page: 27 / 84

19
Operation
Normal Wash Cycle
1. Close the dishwasher door. Press and hold START button for 1 second.
2. Flip the POWER switch up to the " I " position. The switch illuminates, water
enters the wash tank. Wash tank heater heats wash water and the booster
heater begins to heat the final rinse water.
3. Prescrap and load wares into the appropriate dishrack.
NOTE:
Do not overload dishrack. Load wares in a peg rack; load silverware in a
single layer in a flat-bottom dishrack. Overloading dishrack will result in
poor washing results.
NOTE:
Wash temperature gauge must read 150°F before proceeding to the next
step. (140°F for UL100).
4. Open dishwasher door and slide dishrack into the machine. Only wash one
dishrack per wash cycle.
5. Close dishwasher door and press the START switch. The green in-cycle
light illuminates and the wash cycle begins.
NOTE:
Opening the door stops the cycle. When the dishwasher door is closed the
cycle resumes automatically.
UL100, UH-100, and UH100B Control Panel
Models UL100, UH-100, and UH100B