Champion UH-100, Installation Manual

Page: 14 / 84

6
Water Connections
Installation Guide
Water Connections
UH170, UH170B, UH200, UH200B
NOTE:
Plumbing connections must comply with national, local plumbing and
sanitary codes.
NOTE:
Make sure the water supply and the drain hose are not kinked.
1. All models have a 6 ft. flexible hot water fill hose with a 3/4" female garden
hose connector.
2. A 1/2" or larger main incoming supply valve should be installed before the
dishwasher.
3. For UH200B/UH170B Only, a pressure regulating valve, PRV, (supplied by
others) must be installed after the main incoming supply valve if incoming
water pressure exceeds 20-22 PSI/135 kPa
4. The hot water supply must provide a minimum of 140°F, measured at the
dishwasher for the 40°F/ 22°C rise booster. For the 70°F/39°C rise booster
the hot water supply must provide a minimum of 110°F measured at the
dishwasher.
5. The incoming hot water supply line must be a 1/2" line with a flowing
minimum flowing pressure of 20-22PSI/135kPa measured at the dishwasher.
UL100, UH-100, UH100B
1. All models have a 6ft flexible hot water fill hose with a 3/4" female garden
hose connector.
2. A 1/2" or larger shut-off valve should be installed in the main water supply
before the dishwasher.
3. All models have a built-in flow control. The incoming hot water supply must be
a minimum of 25 PSI and a maximum of 95 PSI flowing pressure measured at
the dishwasher.
4. The hot water supply must provide a minimum of 140°F, measured at the
dishwasher for the 40°F/22°C rise booster. For the 70°F/ 39°C rise booster
the hot water supply must provide a minimum of 110°F measured at the
dishwasher.
5. The incoming hot water supply line must be a 1/2" or larger.