18
CARE OF YOUR OPENER
MAINTENANCE SCHEDULE
Once a Month
•
Manually operate door. If it is unbalanced or binding, call
a trained door systems technician.
• Check to be sure door opens & closes fully. Adjust limits
and/or force if necessary (see Adjustment Steps
1 and 2).
• Repeat the safety reverse test. Make any necessary
adjustments (see Adjustment Step 5).
Once a Year
• Oil door rollers, bearings and hinges. The operator does
not require additional lubrication. Do not grease the door
tracks
.
Using Your The Door Opener
Your Security:
®
operator and hand-held remote control
have been factory-set to a matching code which changes
with each use, randomly accessing over 100 billion new
codes. Your operator will operate with up to eight Security:
®
remote controls and one Security:
®
Keyless Entry System.
If you purchase a new remote, or if you wish to deactivate
any remote, follow the instructions in the
Programming
section.
Activate your operator with any of the following:
•
The hand-held Remote Control: Hold top middle button
down until the door starts to move.
•
The wireless wall control CG128 press and hold the
large round button down until the door starts to move.
•
The Keyless Entry (See Accessories): If provided with
your door operator, it must be programmed before use.
See
Programming.
When the operator is activated (with the safety
reversing sensor correctly installed and aligned)
1. If open, the door will close. If closed, it will open.
2. If closing, the door will reverse.
3. If opening, the door will stop.
4. If the door has been stopped in a partially open position,
it will close.
5. If obstructed while closing, the door will reverse. If the
obstruction interrupts the sensor beam, the operator wil
click for five seconds.
6. If obstructed while opening, the door will stop.
7. If fully open, the door will not close when the beam is
broken. The sensor has no effect in the opening cycle.
If the sensor is not installed, or is misaligned, the door
wonʼt close from a hand-held remote. However, you can
close the door with the Door Control, the Outside Keylock,
or Keyless Entry,
if you activate them until down travel is
complete. If you release them too soon, the door will
reverse.
GRIFCO
GRIFCO
Using your CG844 4ch Mini Remote Contro
l
Using your CG128 Wireless Wall Control
