Chaffoteaux & Maury Minima HE System 24 Nat, Installation, Servicing And Operation Manual

Page: 48 / 64

48
18.2.2 Removing the burner
18.2.3 Removing the detection electrode
F
1.
Carry out step
18.1.1
and
18.2.1
;
2.
Remove the 3 screws
F
from the
air/gas manifold (Fig. 60) ;
3.
Slide the burner out from the
front, taking care not to damage
the insulation (Fig. 61);
4.
Reassemble in reverse order,
check all seals are undamaged
and the burner is positioned
correctly (Fig. 62).
1. Carry out step 18.1.1 ;
2. Remove the 2 screws G from the
electrode manifold (Fig. 63) ;
3. Pull the electrode from the
combustion chamber (Fig. 64);
4. Disconnect the detection elec-
trode cable (Fig. 65).
5. Reassemble in reverse order.
18.2.4 Removing the ignition electrode
1. Carry out step 18.1.1 ;
2. Remove the earth cable from the
electrode (Fig. 66)
;
3. Remove the electrode cable H
from the ignitor (Fig. 67);
4. Unscrew the 2 screws I on the
electrode (Fig. 68);
Fig. 60 Fig. 61 Fig. 62
Fig. 63 Fig. 64 Fig. 65
Fig. 66 Fig. 67 Fig. 68
G
H
I