CFR 10416A, Instruction Manual

Page: 7 / 24

CFR CASCADE
7
OPERATING INSTRUCTIONS
All operators should read this entire manual prior to using
the machine.
Pre-Use Inspection
WARNING! Do not fill the Cascade tank prior to the
pre-use inspection.
1. To prepare the Cascade for use, remove the clear
tank lid and disconnect the vacuum hose.
2. Unlatch the fasteners on the front of the machine, open the top.
3. Inspect the solution lines and the vacuum hose
checking for any damage.
4. Close the machine fastening the latches.
5. Reconnect the vacuum hose and replace the clear tank lid.
The Cascade utilizes multiple filters in the recycling of cleaning
solution. It is imperative to the operation of the machine that filters
are kept clean and in good working order with no tears, holes, or
obvious signs of wear. Visually check all filters prior to use.
6. Remove the inlet filter, the main filter and both ball
filters inspecting them for damage.
7. Check the low water shut off float, making sure the float
moves freely.
8. Replace each filter.
❶
❷
❸
❻
Inlet filter
Tank lid
Main filter
Ball filter
low water float