CF MOTO CF500-A, Owner'S Manual

Page: 96 / 146

7. If the engine oil is at or below the lower limit mark, add
sufficient oil of the recommended type to raise it to the
correct level.
8. Insert the dipstick into the oil filler hole, and then tighten
the oil filler cap.
9. Install the panel.
1. Start the engine, warm it up for several minutes, and then
turn it off.
2. Place an oil pan under the engine to collect the used oil,
and then remove the engine oil filler cap.
3. Remove the engine oil drain bolt to drain the oil from
the crankcase.
6. Remove the oil filter cartridge with an oil filter wrench.
An oil filter wrench is available at a nearby dealer.