When the switch is set to
LOCK
, the front gear lock indicator light will flash until the front gear is
locked.
When the indicator light is flashing, turning the handlebar left and right will help the front gear lock to
engage.
Riding before the front gear lock is properly engaged (e.g., when the indicator light is flashing) will
cause the engine speed to be limited until engagement is complete.
When the ATV is in 4WD-LOCK, the maximum traveling speed is limited to 35 km/h (22 mph).
However, if conditions require full engine power to be available, push and hold the override switch to
disable the 4WD-LOCK speed limiter.
Once the engine is running, movement of the throttle lever will
increase the engine speed. Regulate the speed of the machine
by varying the throttle position. Because the throttle is spring-
loaded, the machine will decelerate, and the engine will return
to an idle any time the hand is removed from the throttle lever.
Before starting the engine, check the throttle to be sure it is
operating smoothly. Make sure it returns to the idle position as soon as the lever is released.
Summary of Contents for CF500-A
