3. If the coolant is at or below the lower limit mark, remove
the reservoir cap, add coolant to the upper limit mark,
install the reservoir cap, and then install the panel.
Coolant reservoir capacity(up to the upper limit
mark):0.3 L (0.26 Imp qt, 0.32 US qt)
Hard water or salt water is harmful to the engine. You
may use soft water if you can not get distilled water.
If water is added, have your dealer check the
antifreeze content of the coolant as soon as possible. The radiator fan operation is completely
automatic. It is switched on or off according to the coolant temperature in the radiator.
1. Place the ATV on a level surface.
2. Place a container under the engine, and then remove the coolant drain bolt. (Use a trough or a similar object
as shown to prevent coolant from spilling on the footrest.)
3. Remove the radiator cap.
4. Remove the coolant reservoir cap.
Summary of Contents for CF500-A
