CF MOTO CF500-A, Owner'S Manual

Page: 100 / 146

4. Install the drain bolt and tighten it to the specified torque.
Drain bolt tightening torque:
10 N m (1.0 m kgf, 7.2 ft lbf)
5. Fill the front gear case with oil.
Periodic oil change oil quantity:
0.28 L (0.25 Imp qt, 0.3 US qt)
Total amount oil quantity:
0.33 L (0.29 Imp qt, 0.35 US qt)
6. Install the filler bolt and tighten it to the specified torque.
7. Check for oil leakage. If oil leakage is found, check for the cause.
Be sure no foreign material enters the front gear case.
1. Place the ATV on a level surface.
2. Check the coolant level in the coolant reservoir when the engine is cold as the coolant level will vary with
engine temperature.
The coolant should be between the upper and lower limit marks.