CF MOTO CF500-A, Owner'S Manual

Page: 126 / 146

If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly
inspected. Take the vehicle to your dealer before starting the engine.
If it s impossible to take your ATV to a dealer before starting it, follow the steps outlined below.
1. Move the ATV to dry land or at the very least, to water below the footrests.
2. Remove the spark plug.
3. Check the air box and drain if water is present.
4. Loosen the carburetor drain screw.
5. Turn the engine over several times using the electric start.
6. Dry the spark plug and reinstall, or replace it with a new plug.
7. Tighten the carburetor drain screw.
9. Attempt to start the engine. If necessary, repeat the drying procedure.
10. Take the ATV to your dealer for service as soon as possible, whether you succeed in starting it or not.
If water has been ingested into the CVT, follow the procedure on page 104 for drying out the CVT.