CETAC ASX-1400, Operator'S Manual

Page: 7 / 89

Operator’s Manual Addendum
Notices and Compliance Declarations
AD-2
POWER CORD SET REQUIREMENTS
The power cord set supplied with your
instrument meets the requirements of the
country where you purchased the
instrument.
If you use the instrument in another
country, you must use a power cord set
that meets the requirements of that
country.
This equipment is designed for connection to a grounded
(earthed) outlet. The grounding type plug is an important
safety feature. To reduce the risk of electrical shock or damage
to the instrument, do not disable this feature.
To reduce the risk of fire hazard and electrical shock, do not expose the
unit to rain or humidity. To reduce the risk of electrical shock, do not
open the cabinet. All maintenance is to be performed by an Authorized
CETAC Service Provider.
Protection provided by the equipment may be impaired if the equipment
is used in a manner not specified by the manufacturer.
CLEANING INSTRUCTIONS
To clean the exterior surfaces of the instrument, complete the following steps:
1 Shut down and unplug the instrument.
2 Wipe the instrument exterior surfaces
only using a towel dampened with a
lab-grade cleaning agent.
3
Repeat step 2, using a towel dampened
with clear water.
4 Dry the instrument exterior using a dry
towel.
Do not allow any liquid to enter the instrument cabinet, or come
into contact with any electrical components. The instrument
must be thoroughly dry before you reconnect power, or turn the
instrument on.
ENVIRONMENTAL
Operating Temperature: 10° to 30 C
Relative Humidity 0% to 95%
Altitude 0 to 10000 Ft
CAUTION