CETAC ASX-1400, Operator'S Manual

Page: 47 / 89

ASX-1400 Autosampler Operator’s Manual
Installing the Autosampler
3–13
Note:
Keep at least one copy of the assembly instructions provided for each
rack. Keep the copy with this manual for reference.
2) Place the first sample vial rack at the extreme left-hand side
of the sample tray, so the feet on the rack’s underside engage
the locating ribs on the sample tray’s surface.
Correctly placed sample vial racks will not move more than +/- 2mm
in either a left/right or forward/backward direction unless you lift
them.
3) Place the next sample vial rack to the right of the previous
rack so the feet on the rack’s underside engage the locating
ribs on the sample tray’s surface.
Ensure the rack is not tilted and is properly placed.
4) Repeat step three until you place all the sample vial racks.
When viewed from the front of the ASX-1400, the sample vial racks
should now be arranged on the sample tray as follows: Rack #1 at
the extreme left position, Rack #2 at the left center position, Rack #3
at the right center position and Rack #4 at the extreme right
position.