CETAC ASX-1400, Operator'S Manual

Page: 19 / 89

ASX-1400 Autosampler Operator’s Manual
Preface
xiii
Chapter 3, “Installing the Autosampler,” provides step-by-step
procedures for installing the ASX-1400 and connecting it to the
analytical instrument.
Chapter 4, “Verifying Installation,” explains how to test the
communications interface between the ASX-1400 and the host computer.
It also explains how to check autosampler components and test the
sample probe.
Chapter 5, “Using the Autosampler,” describes the tasks you
perform during daily operation of the ASX-1400.
Chapter 6, “Maintaining the Autosampler,” explains daily, weekly,
and periodic maintenance tasks.
Chapter 7, “Troubleshooting the Autosampler,” describes how to
diagnose and correct ASX-1400 problems.
These chapters are followed by a glossary of related terms.
Conventions Used in This Book
This book uses certain conventions to distinguish different types of
information easily. This section describes these conventions.
Instructions
All step-by-step instructions are numbered and in bold, as in the
following example.
1) Replace the sample vial racks.
Many numbered instructions are followed by more detailed
explanations.