Bedienungsanleitung_CV-EL_DE_EN_REV03.docx
Page 24 of 30
CertoClav Sterilizer GmbH
Peintner Strasse 10
A-4060 Leonding / Austria
Scope of Delivery
After opening the packaging, please inspect the product for eventual transport damage. In case of
damaged items contact your dealer and do not operate the unit for safety reasons.
The following parts are delivered. Please check them carefully. Should one of these parts be missing,
please contact your dealer or call us directly.
The following parts are delivered with the autoclave, please check:
•
Autoclave chamber CV-EL and lid
•
Instrument tray with water level indicator
•
Manometer with gasket and nut
•
Steam release cock with gasket and nut
•
Main cable
•
Manual and warranty certificate
If something is missing, please contact CertoClav Sterilizer GmbH.
Additional we offer the following accessories:
•
Art. no. 8583010 Wire basket diam. 23, stainless steel
•
Art. no. 8582020 Condensation bucket (5L) and hose (1,0m)
•
Art. no. 8582016 Hose (1,0m) for mounting to steam release cock (diam. 10mm)
•
Art. no. 1250499 Service Set 1 with all gaskets
•
Art. no. 8500482 Water distiller. We recommend using distilled water
For further information about our product range visit:
Setup
Autoclave
•
The installation is uncomplicated, either on a table or on the floor, so that an ideal working height is
given.
•
Unpack the pressure gauge and the exhaust steam cock, insert the seal through the opening on the
left and right side of the lid and fix it with the nut from the inside of the lid.
•
We recommend mounting a temperature resistant hose to the exhaust tap
(Art. No. 8582016), inner diameter 10 mm.
•
Plug the power cable into the socket on the device base. The on/off switch is located on the front.
