14
Before carrying out any connection check that the upstream protection devices
(Normal AC source and Bypass AC source) are open "O" (Off).
Always connect the ground wire first
1. Connect the AC cable to terminal blocks as indicator on rear panel
2. Install back the TB Cover
4.2 Parallel set up
1. Remove the parallel kit and insert the parallel PCB.
2. Install parallel kit back to the unit and insert the parallel cable
3. Re-install cover to the kit to secure the plug connection and prevent damage.
Summary of Contents for C500
Page 10: ...2 2 Presentation Front panel ...
Page 13: ...5 Circuit diagram ...
